Belt Alignment Switch

Double Stage Belt Alignment Switch

09.02.2010 | Editor: Marcel Dröttboom

CBAS belt alignment switch (Source: Dwyer Instruments)

The new belt alignment switch series for conveyor systems by Dwyer Instruments offers easy installation and rugged construction.

The Series CBAS is a rugged and reliable conveyor belt alignment switch. The compact die cast aluminum housing is designed for easy installation. The switch cover allows for simple access to wiring terminals and angle adjustments. Belt alignment switches are typically used in pairs with one switch on each side of the conveyor belt mounted near the first and/or last pulley of a conveyor. Each belt alignment switch of the series is equipped with two micro switches, allowing one actuation angle for small belt deviations and a second actuation angle for extreme belt deviations. The actuation angles are factory set at 20 degrees and 35 degrees, each actuation angle can be easily adjusted in the field to fit any application.

Leave a comment

This article is protected by copyright. You want to use it for your own purpose? Infos can be found under (ID: 336099) | Archiv: Vogel Business Media