Leaderboard_Block

Newly Improved Ceramic Tile Corrects Belt Slippage and Premature Wear

Pulley Lagging

Newly Improved Ceramic Tile Corrects Belt Slippage and Premature Wear

Asgco has added a Semi-Ceramic pulley lagging to their pulley lagging product line, featuring 40% coverage. The addition of this Semi-Ceramic Lagging allows Asgco to offer a semi-ceramic product range to provide customers with a choice between full ceramic coverage with our Arrowhead Ceramic Pulley Lagging for high tension drive pulley's, as well as less than full ceramic coverage with Asgco’s new Semi-Ceramic Lagging for smaller pulleys, non-drive pulley's and bend pulley's.
(ed. WoMaMarcel - 05/4/2017)
<Blank Space>
Asgco has added a Semi-Ceramic pulley lagging to their pulley lagging product line, featuring 40% coverage.

According to Asgco, their new Semi-Ceramic Pulley Lagging provides the solution when conventional rubber lagging fails to correct belt slippage and wears prematurely. The ceramic tiles are embedded in rubber on all sides and separated by a horizontal groove for dispelling water and dirt. In addition, Asgco's pre-chemical backing provides strong bond for rubber-to-metal applications. Asgco' Semi-Ceramic Lagging is supplied in 15 in (385 mm) wide × 32.81 ft (10 m) rolls for full versatility.

Features & Benefits

  • Newly Improved Ceramic Tile – provides robust performance in dry, wet, or muddy applications.
  • High Grade – aluminum oxide ceramic
  • Bonding Strength – very high due to 3 mm of neoprene compound vulcanized into bottom-side of the lagging.
  • Pre-Chemical Backing – for ease in installation.
  • Increase Productivity – by delivering increased traction between the conveyor belt and pulley, allowing for lower belt tension than with rubber lagging.
  • Reduce Down Time – on non-drive pulleys, where pulley change-out due to excessive wear is difficult.
  • Rounded corners – allow for better adhesion between the rubber and the tile.
     

 

Most read

Upcoming Events

Facebook